Prof. Dr.-Ing. Thilo Feucht

Contact

Thilo.Feucht@thi.de

Work Technische Hochschule Ingolstadt
Esplanade 10
85049 Ingolstadt

Links

Mehr erfahren

Carlos Miranda	Lateral Torsional Buckling: Assesment of the Stiffness of Torsional Constraints on the Support to ensure a Fork Bearing	Bachelor-Thesis
Daniela Zwach	Assessment of the Design and Load-Bearing Effect of Stiffeners	Bachelor-Thesis
Carolin Weimar	Study of 3-D-Printed Warping Springs	Master-Thesis
J. K.	Assessment of Fabrication Strategies with low Distortions for WAAM of a Bridge	Master-Thesis
Anika Löber	Investigations on Pores in Additive Manufactured Structures	Bachelor-Thesis
Bennet Hodura	Forth Bridge: Structural Analysis of its Construction	Bachelor-Thesis
Annalena Kühn	Beam Reinforcements Using Additive Manufacturing	Master-Thesis
Nils Hillinger	Studies on the Constructive Design of Rigid Frame Corners Using Additively Manufactured Structures	Master-Thesis
Sven Kohlmann	Studies on the Stability of Gusset Plates with Eccentric Load Introduction”	Master-Thesis
Dennis Behnoud	Study of Additive Manufactured Beam Hooks	Master-Thesis
Gino Pampaloni	Additive Manufacturing of Steel: Robot Programming for the Manufacturing of Parameterized 2-D and 3-D Objects”	Bachelor-Thesis
Rafail Sikiotis	Analysis of Load Capacity of Gusset Plates with Two Diagonal Connections	Master-Thesis
Annika Stern	"Twin Towers” (World Trade Center): Assessment of Collapse	Master-Thesis
Benedikt Waldschmitt	Additive Manufacturing of a Bridge	Master-Thesis
Timon Lauck	Eifel Tower in Paris: Structural Analysis of its Construction	Bachelor-Thesis
Sara-Lisa Raab	Calculation of Buckling Lengths of Rods with Variable Cross-Sections	Bachelor-Thesis
Daniel Bechtle	Additive Manufacturing of Columns and their Experimental Investigation	Master-Thesis
Christoph Sebold	Study of 3-D-Printed Clamping Elements	Master-Thesis
Katharina Miller	Experimental Bearing Load Analysis of Over-laid Gusset Plates under Compressive Stress	Master-Thesis
Felix Blum	Additive Manufacturing of Connecting Elements and their experimental Investigation	Master-Thesis
Johannes Schneider	Study of 3-D-Printed Beam Reinforcments	Bachelor-Thesis
Nicole Niewiesk	Study of 3-D-Printed Warping Springs	Master-Thesis
Christiano Talarico	Assessment of the Strengthening of Shear-Panels in Moment Connections by Additive Manufacturing	Master-Thesis
Maren Erven	Study of 3-D-Printed Bolted End Plates	Master-Thesis
Marie Wildjajew	Study of 3-D-Printed Bearing Brace	Master-Thesis
Marc Rothermel	Calculation of Equivalent Buckling Panels and Development of Appropriate Dimensioning Aids	Master-Thesis
Alexander Stockenhuber	Additive Manufacturing of Connecting Parts	Bachelor-Thesis
Shujun Li	Calculation of Equivalent Buckling Panels and Development of Appropriate Dimensioning Aids	Master-Thesis
Beatrice Müller	Study of 3-D Printed Tube Joints	Master-Thesis
Adrian Klöppinger	Optimisation of Structural Design of 3-D Printed Steelstructures	Master-Thesis
Jascha Brötzmann	Analysis of Load Capacity of Gusset Plates	Master-Thesis
M. W.	Calculation of Equivalent Buckling Panels and Development of Appropriate Dimensioning Aids	Diplom-Arbeit
Michael Zacher	Darmstadt’s Central Station: Structural Analysis of its Construction	Bachelor-Thesis
Nils Hillinger	Comparison of Design Concept for Column Base Connections	Bachelor-Thesis
Lukas Löwel	Optimisation of Structural Design of 3-D Printed Steel Structures	Bachelor-Thesis

Lange, J., Feucht, T., Erven, M., Waldschmitt, B.:
3D-Druck im Stahlbau – additive Fertigung von Details, Verbindungen und Bauteilen
Stahlbau Vol. 89 Issue 12, 2020, p. 981 – 991, ISSN 0038-9145

Lange, J., Feucht, T., Erven, M.:
3D printing with steel: Additive Manufacturing for connections and structures
Steel Construction Vol. 13 Issue 3, 2020, p. 144 – 153, ISSN 1867-0520

Feucht, T., Lange, J., Erven, M., Borg Costanzi, C., Knaack, U., Waldschmitt, B.:
Additive manufacturing by means of parametric robot programming
Construction Robotics Journal 4, Springer, 2020, p. 31 – 48, DOI: https://doi.org/10.1007/s41693-020-00033-w

Lange, J., Knaack, U., Feucht, T., Erven, M., Borg Costanzi, C., Waldschmitt, B.:
3-D gedruckte Fußgängerbrücke aus Stahl
Baustatik – Baupraxis 14, Universität Stuttgart, 2020, p. 215 – 222, ISBN 978-3-00-064639-3

Feucht, T., Lange, J., Waldschmitt, B., Schudlich, A.-K., Klein, M., Oechsner, M.:
Welding Process for the Additive Manufacturing of Cantilevered Components with the WAAM
Advanced Joining Processes Vol. 125, Springer, 2020, p. 67 – 78, ISBN 978-981-15-2956-6

Feucht, T., Lange, J., Erven, M.:
3-D-Printing with Steel: Additive Manufacturing of Connection Elements and Beam Reinforcements
Nordic Steel 2019, Kopenhagen, Dänemark, 18. – 20. September 2019, ce/papers, 2019. 3(3-4): p. 343 – 348.

Erven, M., Feucht, T., Lange, J., Eiber, M., Hildebrand, J., Bergmann, J.P.:
Numerische und experimentelle Untersuchungen von Knoten im konstruktiven Stahlbau
DVS Congress 2019, Rostock, 16. – 17. September 2019

Feucht, T. und Lange, J.:
3-D-Printing with Steel: Additive Manufacturing of Connection Elements
SEMC 2019, Kapstadt, Südafrika, 2. – 4. September 2019

Feucht, T. und Lange, J.:

3-D-Printing with Steel: Additive Manufacturing of Connection Elements and Beam Reinforcements
IABSE Symposium 2019, Guimarães, Portugal, 26. – 29. März 2019

Lange, J. und Feucht, T.:
Additive Manufacturing – 3D-Druck im Stahlbau
39. Deutscher Stahlbautag, Duisburg, 11. Oktober 2018

Feucht, T.:
Die Nutzung der Additiven Fertigung von Stahl in der automatisierten Stahlbaufertigung
In: Festschrift Jörg Lange (Festschrift anlässlich des 60. Geburtstages von Herrn Prof. Dr.-Ing. Jörg Lange), TU Darmstadt, Institut für Stahlbau und Werkstoffmechanik, S. 45 – 48

Feucht, T. und Lange, J.:
3-D-Drucken mit Stahl: Additive Fertigung von Anschlusselementen und Trägerverstärkungen
21. DASt-Kolloquium, Kaiserslautern, 6./7. März 2018