back

Dr.-Ing. Pascal Händler

lecturer Steel Construction IV

Working area(s)

Stahlbau IV / Steel Construction IV

Contact

Work Aradis Mobility Germany GmbH
Hanauer Landstraße 174
60314 Frankfurt am Main

Links


since 2024
Team leader at Arcadis Mobility Germany GmbH

2022 - 2024
Engineer at WSP Infrastructure Engineering GmbH


2015 - 2021
Research Assistant at IfSW


2014 - 2015
Project Engineer for Structural Design at Grontmij GmbH (now Sweco GmbH)


2011 - 2014
Master in Civil Engineering at the TU Darmstadt


2008 - 2011
Bachelor in Civil Engineering at the Frankfurt UAS


Research

Application of the SPS-Technology in Short-Span Railway Bridges (Project on Researchgate)

The Bearing Behavior of Warping Springs in Torsionally Loaded I-Beams (Project on Researchgate)

Jan Schäpers Preliminary Assessments and Tests for the experimental determination of the long-term behaviour of massive Polyurethane used in SPS Master Thesis
Maren Dietrich Numerical Investigation to the effects of Temperature- induced Deformations in SPS Elements Bachelor Thesis
Lukas Möller Investigations to the Influence of a Varying Shear Stiffness on the Bearing Behaviour of Short Span Railway Bridges with SPS Master Thesis
Niklas Brand Numerical Investigation of the Ultimate Strength of SPS-Sandwichbeams with Thick Faceplates Bachelor Thesis
Marie Hugo Assessment of the Applicability of the Truss Analogy to Calculate the Internal Forces in SPS-Sandwichpanels Bachelor Thesis
Pauline Grunwald Design and Building of a Test Setup for the Assessment of the Creeping Behaviour of the Massive Polyurethane used in the Sandwich-Plate-System Bachelor Thesis
Arlind Rama Assessment of the Wrinkling Stress in SPS – Sandwichelements and Development of a Limit Criterion Bachelor Thesis
Michelle Klein Laboratory Tests to the Bearing Behaviour of the massive Polyurethane used in the Sandwich-Plate-System Bachelor Thesis
Adrian Pflegshörl Design of Short Railway Bridges with a Longitudinal Spanning Deck of SPS-Construction Master Thesis
Andreas Alt-Hallenberger Design of Short Railway Bridges with a Transverse Spanning Deck of SPS-Construction Master Thesis
Leon Henckes Development of a Tool for the Parametrized Design of FE-Models for Standardized Superstructures of Railway Bridges Master Thesis
Mareike Bopp Research to Previous Experimental Investigations to the Sandwich-Plate-System and Design of own Experiments Master Thesis
Agnes Halfar Assessment of the bearing behaviour of rigid shear connections in sandwich elements with thick faceplates Bachelor thesis
Nicole Niewiesk Study of 3-D-Printed Warping Springs Master Thesis
Sonja Steineck Comparision of different approaches for laminate- and sandwich-elements in glass and steel constructions Master Thesis
Elena Berberich Assessment of the Calculation of Critical Buckling-Loads of Frameworks according to the old DIN 4114 and their Applicability Bachelor Thesis
Anna Krapp Assessment of the Influence of the Planning Process on the Design of the Cross Section of Railway Bridges Bachelor Thesis
Fabian Büttner Assessment of the Bearing Behaviour of Bolted, Rigid Beam Connections under Bending about the Weak Axis Master Thesis
Eric Man Pradhan Design of a SPS-Bridge Deck for Short Railway Bridges Depending on Various Parameters Master Thesis
Maximilian Brinkmann Comparison of Different Methods of Imperfections regarding to DIN EN 1993-1-1 Bachelor Thesis
Maraike Schmitz Research to the History of Load-Models for Bridges Bachelor Thesis
Daniel Gheorghiu Assessment of the Bearing Behaviour of End-Plates in Rigid Connections during Failure Master Thesis
Lisa Zilske Comparison of Various Calculation Methods and Models for Short Railway Bridges Master Thesis
Philip-Alexander Kalous Assessment of the Bearing Behaviour of Torsionally Loaded I-Beams with Warping Springs Master Thesis
M. M. Comparison of Steel Bridge Decks in Short Railway Bridges Depending on Various Parameters Master Thesis
Björn Heftrich Research to the Material Properties of Polyurethane in the Sandwich-Plate-System (SPS) Bachelor Thesis
Antonia Hocks Assessment to the Distribution of Stresses in partial and full Stiffeners with the Program RFEM Bachelor Thesis
Marius Bloß Assessment of the bearing behaviour of end-plates in rigid connections Master Thesis
J. W. Assessment of the bearing behaviour of rigid end-plate connections under bending about the weak axis Master Thesis
S. P. O. Study to the influence of several parameters to the failure of a rigid end-plate connection Bachelor Thesis
Carmen Crespo Vidal Comparison of load distributions to design a tram-bridge Bachelor Thesis
Händler, P., Lange, J.:
Application of the SPS-Technology in Short Span Railway Bridges
Seventh International Conference on Sructural Engineering, Mechanics an Computation, Cape Town, South Africa, 2-4 September 2019
Händler, P:
Untersuchungen zum Tragverhalten von Wölbfedern in torsionsbelasteten I-Trägern.
In: Festschrift Jörg Lange, Festschrift anlässlich des 60. Geburtstages von Herrn Prof. Dr.-Ing. Jörg Lange, TU Darmstadt, Institut für Stahlbau und Werkstoffmechanik, S. 79-84, (2018)
Händler, P., Lange, J.:
Die Anwendung der SPS-Technologie im Bahnbrückenbau.
21. DASt-Kolloquium, Kaiserslautern, 6./7. März 2018
Händler, P.:
The Bearing Behaviour of Warping Springs in Torsionally Loaded I-Beams.
3. Young Engineers Colloquium Hamburg, 1. April 2016